0086-29-87872212
0086-29-87872212
008613402943512
celiawangyanatxa
API Pneumatic Clutch for oil well Mud Pump
Pneumatic Clutch: The spirit moves the clutch with compressed air for friction clutch that motive source. Used for needing to be delivered the big torque generally with turn round the directional equipments with the fast a transformation last, such as the petroleum artesian well machine,...
Detailed description
Pneumatic Clutch:
The spirit moves the clutch with compressed air for friction clutch that motive source. Used for needing to be delivered the big torque generally with turn round the directional equipments with the fast a transformation last, such as the petroleum artesian well machine, ships, large machine pressure, scoop out the machine, ball whet machine, rubber machine etc..
The Pneumatic tube clutch delivers to torque big, join together steady, easy to install, the absorb liberate, can compensate a little amount lard, from move the stalk Cape face with path face opposite be partial to move,from move part inertial and small, service life long,construction tightly packed, seal completely sex good. The Pneumatic transforms the resistance big, Pneumatic material cost is hing,usage temperature contain certain restrict, higher than 60℃ will lower the Pneumatic life span, lower than -20℃ make the Pneumatic change the frailty easily. Pneumatic clutch engagement element used mainly friction dics and friction blocks etc.
Pneumatic type clutch according to its construction form of different can is divided into the common type again is kinds of with well ventilated type.
Common Type:
Depending the Pneumatic delivers to torque, the construction is simple, make and installing the technique request to be low, termolysis would better to not as good as ventilated type. The Pneumatic capacity is bigger, the aeration and deflate time longer, easy is slippery.
Common Type of Pneumatic Clutch Technical Parameters
Type | LT300/100 | LT500/125T | LT600/125T | LT700/200 | LT700/135CBC | LT800/135 | ||
Rotate Speed (R/min) | Max | 2332-2667 | 1642-1877 | 1352-1547 | 1315-1504 | 1198-1450 | 1099-1328 | |
Rating | 1348-1542 | 949-1085 | 781-894 | 760-894 | 687-881 | 635-768 | ||
Torque(N.m) | Max | 3080-4030 | 10455-13670 | 14810-19360 | 33080-43270 | 22350-32660 | 28850-42160 | |
Rating | 2025-2686 | 6790-9114 | 9875-12908 | 22060-28850 | 14900-21775 | 19230-28080 | ||
Weight(Kg) | 11 | 44 | 53 | 67 | 85 | 114 | ||
Working Pressure (Mpa) | 0.6—0.9 | 0.6—0.9 | 0.6—0.9 | 0.7—0.9 | 0.7—1.0 | 0.7—1.0 | ||
Tube Cubage(L) | 1.3 | 5.5 | 5.5 | 17 | 2-4 | 2.4-5 | ||
Drum Dia.(mm) | ∮300 | ∮497 | ∮597 | ∮695 | ∮700 | ∮800 | ||
Connection Size(mm) | Max dia. | ∮450 | ∮720 | ∮820 | ∮1000 | ∮900 | ∮1015 | |
Max Width | 115 | 154 | 154 | 246 | 176 | 176 | ||
Orientation Dia. | ∮450d11 | ∮720h11 | ∮820d9 | ∮1000h11 | ∮900k9 | ∮1015h11 | ||
Bolt QTY and Dia. | 12-∮13H12 | 12-∮17H12 | 16-∮17H12 | 12-∮27H12 4-∮25H8 | 20-∮17H12 | 18-∮27H12 6-∮27H1219 | ||
Bolt Distributing Dia. | ∮430 | ∮690 | ∮790 | ∮950 | ∮870 | ∮950 | ||
Air connection Tube Thread Size | M20*1.5 | M20*1.5 | M20*1.5 | M33*1.5 | 2-M20*1.5 | 2-M20*1.5 | ||
Ventilated Type of Pneumatic Clutch Technical Parameter:
Type | LT500/200T | LT500/250T | LT600/250T | LT700/250T | LT700/135DY | LT800/250T | ||
Rotate Speed (R/min) | Max | 1312-1578 | 1586-1701 | 1281-1544 | 1016-1244 | 1569-1890 | 1016-1224 | |
Rating | 758-912 | 916-983 | 740-892 | 587-707 | 907-1092 | 587-707 | ||
Torpue(N.m) | Max | 17110-24970 | 23390-26900 | 32200-46710 | 50180- 73520 | 24560-35630 | 54240-78660 | |
Rating | 11406-16646 | 15590-17930 | 21466-31140 | 32100—47300 | 16170-23750 | 36160-52440 | ||
Weight(Kg) | 143 | 156 | 195/260 | 320.5 | 254 | 295 | ||
Working Pressrue(Mpa) | 0.7—1.0 | 0.65—0.8 | 0.7—1.0 | 0.7—1 | 0.7—1.0 | 0.7—1.0 | ||
Tube Cubage(L) | 1.3×2 | 3-5 | 2×2 | 2.28×2 | 2.4 | 2.66×2 | ||
摩Drum Dia.(mm) | ∮500 | ∮496 | ∮600 | ∮700 | ∮700 | ∮800 | ||
Connection Size(mm) | Max dia. | ∮780/∮770 | ∮750 | ∮890/∮880 | ∮1010 | ∮935 | ∮1115/∮1105 | |
Max Width | 242 | 288 | 284 | 292 | 200 | 300 | ||
Orientation Dia. | ∮300H8 | ∮750f9 | ∮340H8 40H8*100 | ∮240H8 | ∮360H10 | ∮1105f9 | ||
Bolt QTY and Dia. | 10-∮18H10 | 12-∮18H10 | 12-∮23H10 | 8-∮32H8 | 16-∮22H10 | 16-∮22H10 | ||
Bolt Distributing Dia. | ∮735 | ∮720 | ∮420 | ∮300 | ∮400 | ∮1070 | ||
Air connection Tube Thread Size | 2-G1/2″ | 2-M20×1.5 | 2-G1/2″ | 2-G1/2″ | M20×1.5 | 2-G1/2″ | ||
Type | LT800/250T | LT900/250T | LT1070/200T | AVB1120/300 | LT1170/250T | AVB1250/300 | ||
Rotate speed (r/min) | Max | 1016-1224 | 903-1087 | 932-1123 | - | 765-820 | - | |
Rating | 587-707 | 522-628 | 539-668 | - | 442-474 | - | ||
Torsional moment | Max | 54240-78660 | 68000-989300 | 84600-122670 | - | 117740-134130 | - | |
Rating | 36160-52440 | 45467-65953 | 56400-81790 | 123000-175500 | 78490-89420 | 153000-218000 | ||
Working pressure (MPa) | 0.7-1.0 | 0.7-1.0 | 0.7-1.0 | 0.7-1.0 | 0.7-0.8 | 0.7-1.0 | ||
Clutch cubage(L) | 2.66*2 | 3*2 | 30 | 3.96*2 | 5-7 | 44*2 | ||
Drum dia(mm) | Ø800 | Ø897 | Ø1055 | Ø1120 | Ø1168 | Ø1250 | ||
Spider Size (mm) | Dia. | Ø1115 | Ø1230 | Ø1400 | Ø1450 | Ø1500 | Ø15800 | |
Width | 300 | 292 | 260 | 357 | 302 | 357 | ||
Orien tation dia. | Ø350H8 40HB*100 | Ø1220F9 | Ø1400h11 | Ø840H8 60H8*100 | Ø1500h10 | Ø1050H8 60H8*90 | ||
Bolt QTY and dia. | 12- Ø22H10 | 16- Ø22h10 | 12- Ø27H10 4- Ø25H8 | 20- Ø23H10 | 12- Ø27H10 | 16- Ø25H10 | ||
Bolt Strbuting dia. | Ø4200 | Ø1184 | Ø1350 | Ø890 | Ø1445 | Ø1110 | ||
Air connection tube thread size | 2-G1/2" | 2-G1/2" | 2-M33*1.5 | 2-G1/2" | 2-M33*1.5 | 2-G1/2" | ||
If you have any further requirements, please feel free to contact us by sales@sxgtpm.com
Within those famous China oil and gas pneumatic clutch manufacturers, GAOTON is a professional such supplier, producer and provider, welcome to wholesale petroleum and oilfield API pneumatic clutch from our factory.
