Tel: +86-29-87872212
Categories

Shaanxi Gaoton Petroleum Machinery Co.,Ltd

Tel:0086-29-87872212

Fax:0086-29-87872212

Email:sales@sxgtpm.com

Skype:celiawangyanatxa

Mobile:008613402943512


Choke Manifold ( Throttle Manifold )

Choke Manifold 1.Application Choke manifold is necessary device to control the well kick successfully and execute the pressure control technology on oil/gas well in the course of drilling, as it is, the device is adopted to execute new drilling-well’s technique of balance pressure, which...

Detailed description

 Choke Manifold
1.Application

Choke manifold is necessary device to control the well kick successfully and execute the pressure control technology on oil/gas well in the course of drilling, as it is, the device is adopted to execute new drilling-well’s technique of balance pressure, which can avoid pollution of oil-layer, improve the speed of drilling and control blowout effectively. One end of the device connects with the side flange of BOP spool. When BOP closes, it can control the finite pressure from casing by adjusting the choke valve’s opening, so balanced drilling  can work under minimum pressure-difference.
2.Assembly & structure
Choke manifold consists of choke valve, gate valve, pipeline, fittings and pressure gauge etc, see gate valve part and choke valve part in the above drawing.
3.Working principle
When the pressure rising in well, fluid in well can be released in utilization of the choke valve opening/closing in choke manifold to control casing pressure, which can directly blow out through gate valve as the casing pressure is quite high.
4.Specification
Pressure level is divided into five levels, i.e 14Mpa, 21Mpa,35Mpa,70Mpa and 105Mpa,it can be also designed according to the requirement of customer.
5.Operation requirement
(1)All the working pressures of parts in choke manifold should be matched with the working pressure of the BOP stack used;
(2)Choke manifold should be installed at the place where operator approach it conveniently, pressure test should be executed as installation, while the sealing test pressure should be equal to the rated working pressure;
(3)Pipeline should be so smooth and straight as possible, the corner of the pipeline should be made of 120~shaped forged steel bent pipe, which should have adequately large bore;
(4)The working pressure gauge should be installed;
(5)In winter, the choke manifold be able to work under a low temp condition.
Parts List:

Item

Component

Qty

Material

1

Skid Base

1


2

Hydraulic Choke

1


3

Five—Way Piece

1

4130

4

Gate Valve

1


5

Pressure Gauge

1


6

Needle valve

1


7

Companion Flange

1

4130

8

Gate Valve

10


9

Spacer Spool

2


10

Cross

5

4130

11

Blind Flange

7

4130

12

Spacer Spool

1


13

Gate Valve

2


14

Manual Choke

2


If you have any further requirements, please feel free to contact us by sales@sxgtpm.com

Within those famous China oil and gas choke manifold manufacturers, GAOTON is a professional such supplier, producer and provider, welcome to wholesale petroleum and oilfield API choke manifold from our factory.

Related Products
Feedback